- Use on interior wood surfaces including floors, windows, doors, cabinetry, woodwork, tables, furniture, bar tops, picture frames, fly fishing rods, gun stocks and various woodworking projects.
- Non-toxic when dry/fully cured.
- Also works as a sealer, primer, tie-coat or paint additive to improve adhesion.
- Provides exceptional adhesion to oily, dense, exotic woods like teak, rosewood and ipe.
- Great on porous interior surfaces such as slate, brick, stone, tile, linoleum or cement to seal and prevent chalking and dusting*.
- For exterior projects, Waterlox Original Sealer/Finish can be used as a sealer. Apply 1-2 coats to seal/prime the substrate, followed by 2 coats of our Waterlox Original Marine Finish (see the Marine Finishing Guide).
- Coverage/thinning. One gallon covers 500 square feet per coat. One quart covers 125 square feet per coat. The number of coats depends upon the porosity of the wood. No thinning necessary.
- Dry time. Minimum of 24 hours between coats. Poor ventilation, high humidity or cool temperatures may increase dry times.
- Use our Materials Calculator to order the right amount of Waterlox for your finishing project.
- Use our Materials Calculator to order the right amount of Waterlox for your finishing project.
* Once the project is completed, removing the finish can be very difficult as Waterlox will alter the appearance of porous substrates. Apply all intended coats to a small, inconspicuous area or scrap piece of substrate from the project and allow to dry properly prior to the actual application. Final color effect is always influenced by the texture, porosity, and by the method of application and will be difficult to reverse once finished. For slate, brick, stone and concrete, you may need only one coat to penetrate and seal.